Manual Channel Setup - JVC HR-J295EK Instructions Manual

18 initial settings

Manual Channel Setup

get to the main menu Press MENU. Select the icon
the * and Tbuttons and press OK. The Manual Channel Set
screen of the channel position currently received appears.
get to the confirmation screen Press MENU.
01 C03
02 C02
03
S40
04
S11
05 C02
06
07
08
input channel number Press the ^ and & buttons to input the
Channel Number that you want to store and press T.
OR
Press the number keys to input the Channel Number that you want
to store. Input "0" before any single number entries.
fine tuning Press Tto select
input channel id Press Tto select
to select the required ID from the stored list.
save new channel details Press MENU to save the details you have just entered. The
Confirmation Screen will appear again. Repeat the above procedure from
as many times as required.
close confirmation screen Press MENU.
select position Press the ^ and & buttons on the Remote
Control to select a vacant position then press OK.
00 ARD
00 ZDF In this example, we have chosen position 6.
00 WDR3
00 BR3
00 HR3
- - - - - - - - -
select band When the
- - - - - - - - -
- - - - - - - - -
MOVE:
SET
DELETE:
change the band between C (regular)
and S (cable).
screen appears, press AV to
setting. Press the ^ and & buttons to fine-tune the channel.
MFT
setting and press OK. Press the ^ and & buttons
STATION
PR SET
using
PR SET
MANUAL CH
PR
06
Select Position
CH MFT STATION
C- -
00
CHANNEL/CABLE : AV
onwards