Manual Channel Setup - JVC HR-S6975EK Instructions Manual

Manual Channel Setup

get to the confirmation screen Press MENU button. Move
the highlight bar to
MANUAL CH SET
buttons and press OK button (or
select position Use the PR buttons on the Remote Control to move the highlight bar to a
PR CH ID PR CH
01 26 BBC1 08 - - - -
02 33 BBC2 09 - - - -
03 23 ITV 10 - - - -
04 30 CH4 11 - - - -
05 37 CH5 12 - - - -
06 - - - - 13 - - - -
07 - - - - 14 - - - -
[10]
a k: EDIT
a [x]: DELETE
[MENU]: EXIT
input channel id Press the
PR
buttons to select the required ID from the stored list.
fine tuning Press the
and PR
buttons to fine-tune the channel. A '+' or a '–' symbol will appear during this process.
save new channel details Press OK button to save the details you have just entered. The
Confirmation Screen will appear again. Repeat the above procedure from
as many times as required.
close confirmation screen Press MENU button.
using the PR
).
vacant position then press OK button.
In this example, we have chosen position 6.
ID
select band When the
MANUAL CH SET
press the PR
tons to change the band
between CH (regular) and CC
(cable).
input channel number
Press the
will see the channel number space flashing. Use the number
keys to enter the Channel Number that you want to store.
button to move to the Channel ID space and use the PR
button repeatedly to move to the Fine Tuning '+/–' and use the PR
advanced features
and PR
screen appears,
and PR but-
button and you
MAIN MENU
MODE SET
AUTO CH SET
F MANUAL CH SET
OUTPUT/INPUT SET
CLOCK SET
[1] a k
[MENU]: EXIT
PR CH ID FINE
06 CH01 - - - - +/–
[1]: SELECT
[0]: CURSOR g
k: OK
[MENU]: EXIT
and
onwards
Select Position
49