Starting The App For The First Time - Panasonic KX-PRW110 Setup Manual

3

Starting the app for the first time

After you have installed the Smartphone Connect app on your smartphone, you are ready to start
the app and register your smartphone to the base unit. Use your smartphone to perform this step.
1. Make sure that your smartphone's Wi-Fi feature is enabled and
that your smartphone is connected to the same wireless network
as your base unit.
2. Start the Smartphone Connect app by tapping its icon (shown
here on the right).
3. When prompted to register your smartphone to the base unit, tap
[Start].
R Illustrations shown here depict the Android version of the app.
4. Wait for the registration process to be end.
R The app's [Keypad] screen will be displayed.
R You can confirm that your smartphone is connected to the
base unit.
iPhone/iPad
Check the information in the Notifications Centre.
Android
Check that is displayed in the status bar and notifications
panel.
Note:
R In order to use most of the app's features, your smartphone needs an active Wi-Fi connection.
If your smartphone's Wi-Fi feature is disabled, or if it is configured to suspend (sleep) its Wi-Fi
connection to save power, you will not be able to make or answer calls.
Smartphone Connect Setup Guide
Confirm
To begin registering this mobile
phone to the base unit, tap "Start".
Cancel Start
5