Panasonic DMR-ES20P Service Manual page 17

Mode name
I/P Switch Switch Interlace and Progressive in EE mode.
*Initial setting is "Interlace".
*This command is effective during executing
"White Picture Output", "Magenta Picture Out-
put" and "RTSC Return in XP (A & V)" modes.
Audio Mute (XTMUTE) Check whether mute is applied normally by
the timer microprocessor.
Audio Mute (XDMUTE) Check whether mute is applied normally by
the Digital P.C.B..
Audio Pattern Output The audio pattern stored in the internal mem-
ory is output
(Lch: 1kHz/-18dB)
(Rch: 400Hz/-18dB)
*Audio sound clock switching operation of
DAC can be confirmed by sub command [2]
[4].
Laser Used Time Indic- Check laser used time (hours) of drive.
tion
Delete the Laser Used Laser used time stored in the memory of the
Time unit is deleted.
Item
Description
FL display
Initial mode is Interlace
Switch Interlace/Progressive
Initial mode (Audio 48kHz)
Audio 44.1kHz/48kHz switching
l(*****) is the used time display in
hour.
lLaser used time of DVD/ CD in
Playback/Recording mode
counted.
17
Key operation
(Remote controller key)
Press [1] [4] in I/P Switch mode.
*I/P are switched alternately.
Press [2] [1] in service mode.
Press [2] [2] in service mode.
Press [2] [3] in service mode.
Press [2] [4] in Audio Pattern Output
mode.
*48 kHz / 44.1 kHz are switched
alternately.
Press [4] [1] in service mode.
is
Press [9] [5] in service mode.