Panasonic DMR-ES20P Service Manual page 16

8.1.3. Service Modes at a glance
Service mode setting: While the power is off, press REC, CH UP and OPEN / CLOSE simultaneously for five seconds.
Mode name
Release Items Item of Service Mode executing is cancelled.
Error Code Display Last Error Code of U/H/F held by Timer is dis-
played on FL.
*Details are described in "8.1.1. Self-Diagno-
sis Functions".
ROM Version Display Region code, MAIN firm version, TIMER firm
version and DRIVE firmware versions are dis-
played on FL for five seconds per each ver-
sion in order, but ROM version will be left
displayed.
White Picture Output White picture is output as component Output
from AV Decoder.
*White picture
(Saturation rate : 100%)
*It is enable to switch Interlace/Progressive
by "I/P switch: [1] [4]"
Magenta Picture Output Magenta picture is output with Component
Output from AV Decoder.
*Magenta picture
(Saturation rate: 100%)
*It is enable to switch Interlace/Progressive
by "I/P switch: [1] [4]"
RTSC Return in XP L1 input signal is encoded (XP), decoded
(A & V) (XP) and output decoded signal to external
without DISC recording and DISC playback.
Item
Description
FL display
Region code
MAIN firm version
TIMER firm version
DRIVE firm version
ROM version
'' '' are version displays.
*Initial mode is "Interlace".
Switch Interlace/Progressive
*Initial mode is "Interlace".
Switch Interlace/Progressive
Initial mode: EE2/ Interlace/ XP/
Audio 48kHz
Switch Interlace/Progressive
16
Key operation
(Remote controller key)
Press [0] [0] or [Return] in service
mode.
Press [0] [1] in service mode
Press [0] [2] in service mode
Press [1] [1] in service mode.
Press [1] [4] in White Picture Output
mode.
*I/P are switched alternately.
Press [1] [2] in service mode.
Press [1] [4] in Magenta Picture
Output mode.
*I/P are switched alternately.
Press [1] [3] in service mode.
Press [1] [4] in RTSC Return XP
mode.
*I/P are switched alternately.