PURE It Ultima RO + UV Instruction Manual page 8

12
INSTALLATION AND IMPORTANT INSTRUCTIONS
7
Install your Pureit Ultima RO + UV away from direct sunlight,
and ensure there is enough ventilation.
8
CHANGE
GKK
TDS IN CALL 1860-180-1000 TDS OUT
Ensure input pressure is more than 5 PSI and less than 30 PSI. If it is more than 30 PSI, you need to
use 'Pressure reducing Valve' which can be bought at an additional cost. If the pressure is less than
5 PSI then you need to buy 'Pressure enhancing Pump' which can be bought at an additional cost.
Ensure you buy them from an authorized service personnel of Pureit.
INSTALLATION AND IMPORTANT INSTRUCTIONS
9
CHANGE
GKK
TDS IN TDS OUT
CALL 1860-180-1000
Ensure the reject water pipe is placed lower than the tap of the purifier.
10
CHANGE
GKK
TDS IN CALL 1860-180-1000 TDS OUT
The Post-RO Carbon Filter must be detached from the storage tank and flushed
directly into the sink, at least for 15–20 minutes before starting the regular usage.
Discard the first cycle of water (10 litres) and do not use for drinking.
13
Waste Water