Table of Contents
Advertisement
– Timer Recording –
®
VCR Plus+
Timer Programing
The PlusCode programing numbers are the numbers next to the
program in most TV listing.
Load a cassette with the record safety tab intact. The VCR turns
on, and the counter is reset, automatically.
A
Press PROG. on the Remote to access
the PlusCode No. screen.
B
Press the appropriate Number keys to input the PlusCode
number, then press OK. Check to make sure the setting is
accurate on the Program screen.
PLUSCODE NO.
1 2 3 4 5 6 7 8
PRESS NUMBER KEY (0–9)
THEN (OK)
PRESS (PROG.) TO END
If the Guide Channel Set screen
appears after pressing OK, press the
Number keys, CH+/– or
input the number of the channel on
which the broadcast for the PlusCode
number is received on the VCR, then
press OK.
To set the tape speed, press SP/EP.
To change the stop time, press STOP+/–.
To timer-record daily (Monday–Friday) or weekly serials,
press DAILY (M-F) or WEEKLY. Pressing the button again
makes the "DAILY" or "WEEKLY" display disappear.
If you made a mistake, press CANCEL to access the
PlusCode No. screen again.
If an incorrect PlusCode number or the one for a broadcast
already finished has been inputted, "ERROR" is displayed for
about 5 seconds, then the PlusCode No. screen reappears.
C
Press OK or PROG..
D
Press TIMER. The VCR turns off automatically and "
displayed on the display panel.
PLUSCODE NO.
PRESS NUMBER KEY (0–9)
PRESS (+/–) TO SET
EXPRESS PROGRAMMING
PRESS (PROG.) TO END
PROGRAM 1
(PLUSCODE NO. 12345678)
START
STOP
8:00PM
10:00PM
DATE
CH
12/24/00
12 SP
SUN
PRESS (8=DAILY, 9=WEEKLY
STOP+/– = STOP TIME, SP/EP)
PRESS (OK) TO END
GUIDE CHANNEL SET
GUIDE CH : 12
to
VCR CH
: – – –
rt
PRESS NUMBER KEY (0–9)
OR ( , ), THEN (OK)
PRESS (PROG.) TO END
" is
#
Express Timer Programing
Load a cassette with the record safety tab intact. The VCR turns
on, and the counter is reset, automatically.
A
Press PROG. on the Remote to access the PlusCode No.
screen.
B
Press START+/– once to access
Program screen. Press START+/–,
STOP+/–, DATE+/– or CH+/–
repeatedly to enter the start time, stop
time, date or channel.
Press and hold START+/– or
STOP+/– to increase the time in
30-minute intervals.
To set the tape speed, press SP/EP.
To timer-record daily (Monday–Friday) or weekly serials,
press DAILY (M-F) or WEEKLY. Pressing the button again
makes the "DAILY" or "WEEKLY" display disappear.
C
Press OK or PROG..
D
Press TIMER. The VCR turns off automatically and "
displayed on the display panel.
PROGRAM 1
START
STOP
– –:– –AM
– –:– –AM
DATE
CH
– –/– –/– –
– – – SP
PRESS (+/–, SP/EP, 8=DAILY
9=WEEKLY), THEN (0K)
PRESS (PROG.) TO END
" is
#
Advertisement
Table of Contents
