Recording; Basic Recording - JVC HR-DD858E/EH Instructions Manual

20
EN
Basic

Recording

Turn on the TV and select the VIDEO channel (or AV mode).
1
4
NUMBER
7
SP/LP
1
RECORD
Recording Resume Function
If there is a power outage during recording (or Instant
Timer Recording or timer recording), the recording will
resume automatically when power is restored to the
recorder unless the recorder's memory backup has expired.
PAUSE
– –:– –
2 3
2
5 6
8 9
0
4
TV PROG
PLAY
PAUSE
TV signals being received by the recorder's built-in tuner can be
recorded onto a video tape. You can "capture" a TV programme
using your video recorder.
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
The counter is reset to 0:00:00 and the recorder
power comes on automatically.
CHOOSE A PROGRAMME
2
Press TV PROG +/– or the NUMBER keys to select the
channel you wish to record.
The TV PROG dial can also be used to select a channel.
SET TAPE SPEED
3
Press SP/LP ( ). Check the SP/LP indicator on the
recorder display panel to confirm the selected tape
speed.
The HR-J758E/EH owners can use the SP/LP button
on the recorder's front panel as well.
START RECORDING
4
Press and hold RECORD and press PLAY on the remote
control, or press RECORD on the recorder.
B.E.S.T. takes place at the beginning of both the
first SP and the first LP recording after inserting the
cassette ( pg. 24).
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
6
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
RECORDING
Record safety tab