Micro Sd Card; Recording; Image Stabilization; Camera Mounting And Aiming - Midland XTC280 Quick Start Manual

Micro SD Card

1 . Open and fold down the back rubber cover.
2 . Insert Micro SD card into slot observing proper direction (shown below
. 3 Return rubber flap into place.
Getting to Know the Camera

Recording

1. Move the RECORD switch forward. This turns the camera on.
2. The battery indicator will light from red to green. The Micro SD card indicator will
light green. The record indictor will begin flashing red after 8 seconds. This
indicates the camera is capturing video.
3. To stop recording, move the RECORD switch back to the off position.Note: The
camera will continue recording for 3 seconds after toggling the switch to the off
position.
Micro SD Card
LED Status
Green 1 GB or more available.
Orange 512 MB to 1 GB available.
Red Below 512 MB available or
no Micro SD card installed.
Flashing Red Cannot read the card.
6
Meaning
midlandusa.com
).

Image Stabilization

The XTC280 uses Digital Image Stabilization (DIS)
to visually stabilize the video from a shaking or
vibrating camera.
Mount on Dual Track System
The XTC280 was designed with an innovative
identical dual track mount system on both sides of the
camera. This allows you to mount it on either side of a
helmet with ease. In addition, the interchangeable
mount piece can be moved from the helmet mount to
the goggle mount. This eliminates the hassle of
having to remount the camera every time.
Flashing Green Indicates card has been
reformatted.
*Note: Requires Class 4 or higher Micro SD card
Memory Size 720 Record
Time
512 MB 6.5 Minutes
1 GB 13 Minutes
2 GB 26 Minutes
4 GB 52 Minutes
8 GB 104 Minutes
16 GB 208 Minutes
32 GB 416 Minutes
*Note: The camera automatically splits the video
into 2 GB segments.
Camera Mounting and
Aiming
1080 Record Time
5.5 Minutes
11 Minutes
22 Minutes
44 Minutes
88 Minutes
176 Minutes
352 Minutes