Getting To Know The Camera; Battery - Midland XTC280 Quick Start Manual

Record LED
Battery LED
H/L Mode
Switch
midlandusa.com

Getting to Know the Camera

Battery

1. To insert the battery, push down the battery
door latch on the right side of the camera.
Door will release. Push forward to remove.
2. Install Lithium-Ion battery.
3. Return battery door and click into place.
Battery Status
Indicator
Solid Green
Blinking Green
Solid Red
Blinking Red*
No Light
*Note: When the red battery LED
begins blinking, be prepared to charge
the battery because the camera will
stop recording at this point.
Meaning
Indicates full battery life
Battery is charging
Indicates half battery
life
Indicates low battery
life
Battery is dead
5