Table of Contents
Advertisement
36
Manual
Channel Set
1
4
NUMBER
7
/
2
1
¶
1
MENU
3
OK
ATTENTION
After you have stored channels manually, be sure to
perform Guide Program Number Set (
get proper results from Video Plus+ timer recording.
2
3
5
6
8
9
0
4
3
¡
7
8
4
¢
PUSH JOG
pg. 10) in order to
Storing Channels Manually
Store channels that were not stored during Auto Set Up (
8) or Auto Channel Set (
ACCESS MAIN MENU
1
Press MENU twice.
ACCESS CONFIRMATION
SCREEN
2
Press PUSH JOG%fi to move the highlight bar (pointer)
to "MANUAL CH SET", then press OK. The Confirma-
tion screen appears.
SELECT POSITION
3
Press PUSH JOG% fi
which you want to store a channel begins blinking,
then press OK. The Manual Ch. Set screen appears.
INPUT CHANNEL
4
The number "21" appears
blinking to the right of
"CH". Press the NUMBER
keys to input the channel
number you want to store.
For fine tuning adjust-
ment, press PUSH JOG
until the channel
number begins blinking,
then press PUSH JOG % fi. While tuning, "F+" or "F–
" appears.
ENTER NEW CHANNEL
INFORMATION
5
Press OK and the Confirmation screen appears.
Repeat steps 3 through 5 as necessary.
CLOSE CONFIRMATION
SCREEN
6
Press MENU.
To input the station name, see page 38.
To change positions, see "Change Station Preset
Position" (
pg. 37).
TUNER SET (cont.)
pg. 34).
until an open position in
MANUAL CH SET
PR
CH
01
CH21
[ 5 ∞]/ [0-9] : SELECT
[
] : CURSOR
: OK
[MENU] : EXIT
pg.
Advertisement
Table of Contents
