JVC HR-A630EK Instructions Manual page 23

6
2
1 2
4 5
7 8
3
0
CANCEL
4
SP/LP
Satellite Receiver Users
To timer-record a satellite broadcast using Video Plus+,
perform steps 1 – 6 and, before the selected programme
begins, select the appropriate channel on the satellite
receiver. Then set the receiver's timer. If your satellite
receiver doesn't have a timer, leave the unit's power
switched on.
4
5
q
6
4
6
NOTE:
For safety, your recorder disables all other functions while in the
3
Timer mode. If you want to use the recorder but its Timer mode
is engaged, press TIMER and all other functions are operable.
6
To re-engage the timer, press TIMER.
WEEKLY
9
To Delay The Stop Time . . .
6
. . . press ADD TIME (NUMBER key "5") after pressing OK in
TIMER
step 3. Each time you press, the Stop time is delayed by 5
minutes (meaning that 5 minutes of recording time is added).
You can easily compensate for anticipated programme schedule
delays this way.
To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (NUMBER key
"9") for weekly serials or DAILY (NUMBER key "8") for daily
serials (Monday – Friday). "W" or "D" appears on the front
display panel.
You can programme this recorder to timer-record as many as 8
5
OK
programmes. If you try to programme the recorder to record a
ninth, "FULL" appears on the front display panel. To record the
extra programme, you must first cancel any unnecessary
programmes (
SET TAPE SPEED
Press SP/LP ( ) to set the tape speed.
RETURN TO NORMAL
DISPLAY
Press OK.
Repeat steps 1 – 5 for each additional programme.
ENGAGE RECORDER'S
TIMER MODE
Press TIMER.
pg. 26).
23