Panasonic KX-FHD333BR Service Manual page 49

Code Function
594 Overseas DIS detection select
595 Receive error limit value set
596 Transmit level set
598 Receiving sensitivity
700 EXT.TAM OGM Rec. time
701 No voice detect time
717 Transmit speed selection
718 Receive speed selection
722 Redial tone detect
737 Junk correct call
745 Power ON film feed
763 CNG detect time for friendly
reception
771 T1 timer
774 T4 timer
815 Sensor & Vox check
844 Original setting
852 Print test pattern
853 Top margin
880 History list
881 Journal 2 list
882 Journal 3 list
Set Value Effective
Range
1:detects at 1, 2
the 1st time
2:detects at
the 2st time
X Number of 001~999
times
X dBm - 15~00
43= -43 dBm 20~48
X second 01~99
X100 msec 01~99
1:9600BPS 1~4
2:7200BPS
3:4800BPS
4:2400BPS
1:9600BPS 1~4
2:7200BPS
3:4800BPS
4:2400BPS
1:ON 2:OFF 1, 2
1:ON 2:OFF 1, 2
1:ON 2:OFF 1, 2
1:10 sec 1~3
2:20 sec
3:30 sec
1:35 sec 1, 2
2:60 sec
X 100 msec 00~99
1:NORMAL 1~3
2:LIGHT
3:DARKER
1~9
49
Default
1 See Symptom/Countermeasure Table for long
distance and international calls in THE UNIT CAN
COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS (P.79).
Refer to SOMETIME THERE IS A TRANSMIT
PROBLEM (P.77) and THE UNIT CAN COPY,
BUT CANNOT EITHER TRANSMIT/RECEIVE
LONG DISTANCE OR INTERNATIONL
COMMUNICATIONS (P.79).
100 Sets the number of acceptable error lines when
the FAX reconstructs the received data. Refer to
RECEIVE PROBLEM (P.78).
-07 Selects the FAX transmission level. Refer to
SOMETIME THERE IS A TRANSMIT PROBLEM
(P.77)and RECEIVE PROBLEM (P.78).
40 Used when there is an error problem. Refer to
THE UNIT CAN COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS (P.79).
10 Sets the start time of silent detection.
50 Sets the silent call confirmation detection time.
1 Adjusts the speed to start training during FAX
transmission. Refer to SOMETIME THERE IS A
TRANSMIT PROBLEM (P.77) and THE UNIT
CAN COPY, BUT THE TRANSMISSION AND
RECEPTION IMAGE ARE INCORRECT (P.82).
1 Adjusts the speed to start training during FAX
reception. Refer to RECEIVE PROBLEM (P.78)
and THE UNIT CAN COPY, BUT THE
TRANSMISSION AND RECEPTION IMAGE ARE
INCORRECT (P.82).
1 Sets the tone detection mode after redialing.
2 This feature cannot be used for Extension
telephone. When a circuit is caught by Auswering
Machine, it cannot use.
1 When the power is turned on, the film is wound to
take up any slack.
3 Selects the CNG detection tone of friendly
reception.
1 Sets a higher value when the response from the
other party needs more time during FAX
transmission.
0 Use this function when delay occurs in the line
and communication (ex. Mobile comm) does not
work well.
See TEST FUNCTIONS (P.50).
1 Use this feature when you need to transmit and
copy a document with very faint writing or very dark
writing.
NORMAL: Used for normal writing.
LIGHT: Used for faint writing.
DARKER: Used for dark writing.
See TEST FUNCTIONS (P.50).
5
See HISTORY (P.58).
See PRINTOUT EXAMPLE (P.95).
See PRINTOUT EXAMPLE (P.95).
KX-FHD333BR
Remarks
----------