Table of Contents
Advertisement
5.2.
GEAR SECTION
5.2.1.
GEAR OPERATION
Once a mode is selected, the Drive Motor Gear rotates clockwise (CW) and then the controlling positions of Swing Gears A, B
and C determine which gears convey their drive power in each mode. See "Sensor Location" in SENSORS AND SWITCHES
(P.135).
5.2.1.1.
TRANSMIT MODE
The TX MOTOR rotate CCW and conveys its power to the document separation roller gear and document Exit Roller Gear.
5.2.1.2.
PAPER PICK UP AND PAPER EXIT MODE
The RX MOTOR rotate CCW and swing Gear B engages Gear C, and conveys its power to the Pickup Roller Gear.
The Swing Gear B engages Gear D, and conveys its power to the Exit Roller Gear.
Fig. A: Transmit mode
Fig. B: Paper Pickup / Paper Exit mode
23
KX-FHD333BR
Advertisement
Table of Contents
Troubleshooting
