Graco GM3500 SPRAYER 231-078 Instructions And Parts List page 25

REPAIR
Engine
NOTE: The engine must be removed before the
Field, Clamp or Clutch Housing can be re- A
moved.
1. Working under the mounting plate (A) of the cart,
remove the screw (15), lockwasher
(80)
and
washer
(34)
holding the clutch housing (2) to the
cart. See Fig
25-1.
TO ENGINE
2. Stillworking underthe mounting plate, remove the
two nuts
(61)
and lockwashers
(9),
and then pull
the screws
(14)
out of the base of the engine. Dis-
connectthe red wire from the engine lead (B). Dis-
connect the black and white wires from the field.
Pull the wires carefully through the grommets
(66)
before removing the engine. See Fig
25-1
and
25-2.
3. Lift the engine carefully and place it on a work
bench.
4. Remove the Field and Wiring Harness, Clamp
and Clutch Housing. See pages
26
and 27.
5.
Skip ahead to Reassembly, page 28, Step 1.
NOTE: All service to the engine must be performed
by an authorized HONDA dealer.
VIEW FROM UNDER ENGINE MOUNTING PLATE
Fig 25-2
A
Fig 25-1
307-893 25
~~
~~