Upgrading Software - Samsung HT-H6500WM User Manual

Settings
✎
Text files, such as files with a .TXT or .DOC
extension, will not display when you are using the
Wi-Fi Direct function.

Upgrading Software

The Software Update menu allows you to upgrade
the product's software for performance improvements
or additional services.
• Never turn the product off or back on manually
during the update process.
1. In the Home menu, select Settings, and then
press the OK button.
2. Select Support, and then press the
3. Select Software Update, and then press the
OK button.
4. To download update software and update now,
select Update now, and then press the
button. See "Update now" on this page for
details.
5. To let the product download update software
automatically when available, select Auto
Update, and then press the
page 24)
✎
The upgrade is complete when the product turns
off, and then turns on again by itself.
✎
Samsung Electronics takes no legal responsibility
for product malfunction caused by an unstable
Internet connection or consumer negligence
during a software upgrade.
✎
If you want to cancel the upgrade while the
upgrade software is downloading, press the
button.
✎
When a system upgrade is in progress, "UPDATE"
is displayed on the front panel.
Update now
You can use Update now to update the software
through your network connection or by using a USB
flash drive. The network instructions are below. The
USB flash drive instructions are on the next page.
1. Select Update now, and then press the
button.The Update now pop-up appears.
2. The product searches on line for the latest
software version.
3.
4.
5.
6.
7.
✎
OK button.
✎
Auto Update
OK
You can set the Auto Update function so that the
product downloads new upgrade software when it is
in Auto Update mode.
In Auto Update mode, the product is on, but its
OK button. (See
Internet connection is active. This allows the product to
download upgrade software automatically, when you
are not using it.
1.
2.
OK
✎
OK
24
- English
If it does not find an update, the "There are no
new updates for you at the moment." pop-up
appears. Press the OK button to exit.
If it finds a new version, the Update Request
pop-up appears.
Select OK. The product upgrades the software,
turns off, and then turns on automatically.
If you do not select OK or Cancel in one minute,
the product stores the new upgrade software.
You can upgrade the software later using Auto
Update.
If you select Cancel, the product cancels the
upgrade.
When the system upgrade is done, check the
software details in the Product Information section
of the Contact Samsung screen.
Do not turn off the product during the Software
Upgrade. It may cause the product to malfunction.
Press the ,. buttons to select Auto Update
mode, and then press the
Select On or Off.
If you select On, the product will automatically
download new upgrade software when it is
in Auto Update mode with the power on. If it
downloads new upgrade software, the product
will ask you if you want to install it when you turn
the product on.
To use the Auto Update function, your product
must be connected to the Internet.
OK button.