Hoover Twin Tank Instruction Manual page 8

Assembly
1.2
B
1.3
Hose
How to Attach and Remove
1. Fit the hose assembly with built in handle over the steam
nozzle on hand steamer (1.2). Align the orientation marks
and rotate clockwise until hose assembly is in locked
position and secure.
2. To remove assembly, slide release button at the base
of hose away from steam cleaner and rotate counter-
clockwise and pull away hose.
Attaching Accessories to Hose/Handle Assembly
A
1. Once hose assembly is attached, you can attach the wand
or wedge accessories to the Hose Handle (1.3, A) (See
"Accessory Chart"). To connect the wand and wedge, pull
back the quick release ring (1.3, B) on handle and insert
the wand or wedge.
Once wand or wedge is attached, release the ring
(1.3, B), attach the corresponding microfibre pad
over frame and secure with the bungee clip. See
"Accessory Chart" for suggested use. See
"Maintenance" section for cleaning instructions.