Changing The Gprs Code; Exit The Settings Menu - Fiat Croma User Manual

Changing the GPRS code

If your mobile phone carrier requires to
change the GPRS code, you can perform
this operation via the ADV. OPTIONS
menu.
?
To change the GPRS code using
manual interaction, proceed as fol-
lows:
Go to the GPRS CODE menu and
ß
press OK or .
The display will show GPRS:, and a
list of digits (1, 2, 3, 4, 5, 6, 7, 8, 9),
DEFAULT, and DISABLE. To
select the new GPRS code, press Q
and Z until choosing the required
option, then press OK or
store the default value, select DE-
FAULT. To disable the connection
code, select DISABLE.
After setting the new GPRS code,
Blue&Me™ will display the mes-
sage GPRS CODE SET.
}
To set the GPRS code using voice
interaction, proceed as follows:
'
Press , pronounce "Settings"
and then "Connection code".
Blue&Me™ will prompt "The cur-
rent GPRS connection code is value.
To change code say a number from
1 to 9 or say "Default". To disable
the connection code say "Disable".
To change the code, say a number
from 1 to 9 or say "Default". To dis-
able the connection code say "Dis-
able". (In previous text, value is the
GPRS connection code set at that
moment).
ß
After setting the new connection
. To
code, Blue&Me™ will say "The
Connection Code is set to value"
(here value corresponds to the new
GPRS code set).

EXIT THE SETTINGS MENU

At the end of any of the operations de-
scribed above, you can exit the settings
menu as described below.
?
To exit the SETTINGS menu us-
ing manual interaction:
Select EXIT and then press OK or
ß
.
Or, using voice interaction:
}
'
Press and pronounce "Exit".
43