Safety Precautions - Samsung WF-F1256 Service Manual

1. Precautions

1-1. Safety Precautions

1. Do not allow the customer to repair the product.
☞ It may cause personal injury or product damage when the unit is serviced by unqualified personnel.
2. Disconnect power to the appliance before servicing.
☞ Be aware of the possibilities of an electric shock.
3. Do not use multi-plug.
☞ Power outlet may be overloaded causing the socket to overheat.
4. Check for any damage on power plug or power outlet.
☞ Replace it immediately if it has problem. (It may cause an electric shock or fire)
5. Make sure to earth the product.
☞ May cause electric shock.
6. Do not clean the product with water.
☞ May cause electric shock / fire or shorten product life.
7. The wiring harness should be free from moisture and connected properly during serving.
☞ It should be proof against any external force.
8. Remove any dust or dirt in the product, wiring section and connections during servicing.
☞ Protect against possibilities of fire due to tracking etc.
9. Check for any water trace on electrical parts, harness, etc.
☞ Replace the parts and /or wipe dry the water.
10. Check the assembled status of the parts after servicing.
☞ Check if the product is assembled in the same status as before servicing.
11. Be sure not to pull on the power cord but to unplug it by holding the plug.
☞ Beware of possibility of electric shock or fire when the power cord is damaged.
12. Unplug the power plug from the outlet when the washing machine is not used.
☞ Beware of possibility of electric shock or fire while lightening.
13. Do not use or put flammable materials (including gasoline, alcohol, thinner etc) around the
washing machine.
☞ Flammable materials may spark an explosion or fire.
14. Do not put a water containing bowl or wet laundry on the washing machine.
☞ It may cause an electric shock or fire, or shorten the product life when its water penetrates into the
washing machine.
15. Do not install the washing machine in a place where it is exposed to snow or rain etc.
☞ It may cause an electric shock or fire and shorten the product life.
16. Do not press control buttons with pointed objects such as pins, needles, etc.
☞ It may cause an electric shock or other problems.
17. Check the washing machine is leveled horizontally on the floor and is installed properly.
☞ Vibration may shorten the product life.
18. Make sure to use connectors when connecting wires.
☞ If wires are connected without connectors, it may cause a tracking fire.
19. When the washing machine is to be laid down for servicing, put a pad on the floor and lay the
product on its side slowly.
☞ If the wash machine is laid on its front, internal components may be damaged by the tub.
1