Selecting A Mode; Timekeeping; Configuring Home City Settings; Configuring Current Time And Date Settings - Casio 5415 Operation Manual

Selecting a Mode

• The illustration below shows which buttons you need to press to navigate between modes.
To return to the Timekeeping Mode from any other mode, hold down D for about two seconds.
•
Stopwatch Mode Stopwatch Mode
Mode dial hand Mode dial hand
Countdown Timer Mode Countdown Timer Mode
E-8
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Direct Timekeeping Mode Access
To enter the Timekeeping Mode from any other mode, hold down D for about two seconds.
•
Auto Return Features
• The watch will automatically return to the Timekeeping Mode if you do not perform any button operation
for a particular amount of time in each mode.
Mode Name
Alarm, Digital Compass
Thermometer
Setting screen (digital setting fl ashing)
Initial Screens
When you enter the Alarm, World Time, or Digital Compass Mode, the data you were viewing when you
last exited the mode appears fi rst.
Scrolling
The E and B buttons are used on the setting screen to scroll through data on the display. In most
cases, holding down these buttons during a scroll operation scrolls through the data at high speed.
E-10

Timekeeping

Use the Timekeeping Mode to view the current time and date, and the day of the week.
Each press of A in the Timekeeping Mode will change screen contents as shown below.
•
• The digital meter shows the seconds count.
Date Screen
Month Day Digital meter
Hour hand
Minute hand
Day of week
Mode dial
hand
Second hand
E-12
5. After all of the settings are the way you want, press A to exit the setting screen.
• The DST indicator will be on the upper display while daylight saving time is turned on.
Note
• After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate
the current time for other time zones based on the current time in your Home City.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
To change the daylight saving time (summer time) setting
1. In the Timekeeping Mode, hold down A until ADJ appears in the
lower display.
When you release A (after ADJ appears), SET will be fl ashing in
•
the upper display.
2. Press D.
• This will cause the DST indicator to appear in the upper display
and the DST setting of the currently selected Home City to appear
in the lower display.
3. Press E to toggle the DST setting between daylight saving time (ON) and standard time (OFF).
4. After all of the settings are the way you want, press A to exit the setting screen.
• The DST indicator will be on the upper display while daylight saving time is turned on.
E-14
Operation Guide 5415
World Time Mode World Time Mode
Alarm Mode Alarm Mode
Approximate Elapsed Time
2 to 3 minutes
1 to 2 minutes
2 to 3 minutes
Time Screen
Hour : Minutes
PM indicator Seconds
• The mode dial hand indicates the watch's current mode.
Timekeeping Mode Timekeeping Mode
Mode dial hand Mode dial hand
Thermometer Mode Thermometer Mode
Digital Meter
• The digital meter indicates the seconds count in the Timekeeping Mode (page E-12), World Time Mode
(page E-37), and Timer Mode (page E-42). In the Stopwatch Mode (page E-40) it indicates the
1/10-second count.
• While viewing bearing memory contents in the Digital Compass mode (page E-29), the digital meter
shows a bearing pointer.
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City, and selecting either standard time or
daylight saving time (DST).
To confi gure Home City settings
1. In the Timekeeping Mode, hold down A until ADJ appears in the
lower display.
When you release A (after ADJ appears), SET will be fl ashing in
•
the upper display. This is the setting mode.
• The watch will exit the setting mode automatically if you do not
perform any operation for about two or three minutes.
2. Use E (East) and B (West) to scroll through the available city codes.
• Keep scrolling until the city code you want to select as your Home
City code and city name City code and city name
City is shown in the lower display.
DST indicator DST indicator • For details about city codes, see the "City Code Table" at the back
of this manual.
3. Press D.
• This will cause the DST indicator to appear in the upper display
and the DST setting of the currently selected Home City to appear
in the lower display.
4. Press E to toggle the DST setting between daylight saving time (ON)
and standard time (OFF).
• Note that you cannot switch between standard time and daylight
saving time (DST) while UTC is selected as your Home City.
Confi guring Current Time and Date Settings
You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.
Changing the digital Home City data should cause the analog time setting to change accordingly. If the
analog time does not indicate the digital time, check the home positions of the hands and make
adjustments if necessary (page E-18).
To change the current time and date settings
1. In the Timekeeping Mode, hold down A until ADJ appears in the
lower display.
When you release A (after ADJ appears), SET will be fl ashing in
•
the upper display.
City code City code
Digital Compass Mode Digital Compass Mode
Mode dial hand Mode dial hand
Digital Meter
E-9
E-11
E-13
E-15