10. High static-pressure switch (Full duct type and semi duct type)
For full duct type and semi duct type, set the high to HIGH STATIC-PRESSURE.
G
If not set to HIGH, there will be reduction of cooling and heating capacities.
G
11. Wired remote control receiver circuit
In wired remote control receiver circuit, the signal will transmit to micro computer pin 3 by using
G
photocoupler PC101.
Fig. 13-1
Static pressure sw
Normal
High
Drain pump test drive sw
Fig. 10-1
– 59 –
Main P.W.B.