Installing A Child Restraint System By Lap/Shoulder Belt - Kia 2007 Sedona Owner's Manual

Features of your vehicle
E2MS103005
Installing a child restraint system by
lap/shoulder belt
To install a child restraint system on the
outboard or center rear seats, do the fol-
lowing:
1. Place the child restraint system in the
seat and route the lap/shoulder belt
around or through the restraint, follow-
ing the restraint manufacturer's
instructions. Be sure the safety belt
webbing is not twisted.
3 76
E2BLD310
2. Fasten the lap/shoulder belt latch into
the buckle. Listen for the distinct "click"
sound.
Position the release button so that it is
easy to access in case of an emergency.
MMSA3028
3. Pull the shoulder portion of the safety
belt all the way out. When the shoulder
portion of the safety belt is fully
extended, it will shift the retractor to
the "Auto Lock" (child restraint) mode.