Mercedes-Benz E 320 Operator's Manual page 88

Parking position
The passenger-side exterior mirror can be adjusted and
programmed to assist the driver during parking
maneuvers (e.g. to observe the curb or other objects
close to the vehicle).
With the electronic key in steering lock position 2, and
the exterior rear view mirror switch in the passenger
side position, the passenger side mirror will be turned
downward when placing the gear selector lever in "R"
reverse.
The passenger side mirror will return to its previous
position:
• immediately at speeds above approximately 6 mph
(10 km/h) - independent of the engaged gear,
• after 20 seconds when shifting gear selector lever
from "R" Reverse,
• by pressing the driver's side mirror button %.
Rear view mirrors
Instruments
Operation
and controls
Instrument
Driving
cluster display
One passenger-side mirror position can be stored in
memory. To do so:
1. Turn electronic key to steering lock position 2.
The vehicle must be stationary.
2. Select passenger-side mirror and adjust the mirror
to view the curb.
3. Press green memory button located in switch
cluster for driver seat, see page 48.
4. Within 2 seconds pull the mirror toggle switch
rearward. The mirror should not move.
Repeat the memory procedure if the mirror moves.
85
Practical hints Car care
Technical
Index
data