Epson EPL-N2750 Reference Manual page 309

❏ The height of the barcode is automatically adjusted to 15% or
more of its total length, in conformance to the Codabar
standard. For this reason, it is important to keep at least one
space between the barcode and the surrounding text to
prevent overlapping.
❏ When either a Start or a Stop character is input, Codabar fonts
automatically insert the complimentary character.
❏ If neither a Start nor a Stop character is input, these characters
are automatically input as the letter A.
Character type
Number of characters
Font size
The following codes are inserted automatically and need not be
input by hand:
❏ Left/right quiet zone
❏ Start/Stop character (when not input)
❏ Check digit
D-26
Working with Fonts
Numbers (0 to 9)
Symbols ( - $ : / . +)
No limit
When OCR-B is not used: 26 pt or more
(up to 96 pt in Windows NT).
Recommended sizes are 26 pt, 52 pt, 78
pt and 104 pt.
When OCR-B is used: 36 pt or more (up
to 96 pt in Windows NT).
Recommended sizes are 36 pt, 72 pt, 108
pt and 144 pt.