4.14 FL Inverter Board
Removal
To remove the FL inverter board, follow the steps below and refer to Figure 4-23.
1.
Turn off the power to the computer and disconnect the AC adapter, power cord,
and all external cables.
2.
Remove the battery pack and display mask as described in sections 4.2 and 4.13.
3.
Remove two brass M2x6 screws from the FL inverter board.
4.
Turn over the board and disconnect the FL inverter cable from CN1 and the FL
cable from CN2.
T3400, T3400CT
Figure 4-23 Removing the FL Inverter Board
4-31