To store the phone number, press
6.
you entered displays, along with the notification
'Recorded'. If the number you entered matches a
name/number already stored in your Internal Phone
Book, then the name also displays.
The screen then returns to the
7.
Setting Up Voice Dial
Voice Dial is always active once you have programmed the
phone to accept Voice Dial entries. To place voice activated
calls, press and hold
phone after you hear the voice prompt and the beep.
You can also initiate a voice activated call by opening the
flip, when the Voice Dial option is activated.
To change the Voice Dial setup options:
From the
1.
Main Menu
Press
2.
Press the toggle to locate the option:
3.
Talk Only
holding
Talk / Flip
holding
opening the phone's flip cover.
When the desired option displays, press
4.
Placing a Call Using Voice Dial
To place a call if Voice Dial is inactive:
Open the phone.
1.
Press and hold down the
2.
At the voice prompt, say the name into the phone.
3.
The phone automatically places the call if it recognizes
the name.
If the phone does not recognize the name, it prompts for
the name again.
If the phone is unable to recognize the name after two
attempts, it prompts "The name cannot be recognized."
and the following message displays: "Cannot recognize
Using the Voice Services of Your Sprint PCS Phone
. Then say the name into the
press
for
.
Set Active
Enables voice dialing by pressing and
.
Enables voice dialing by pressing and
(when the phone is open), or by simply
. The number
menu.
Voice Dial
for
Voice Dial
.
key.
.
93