Basic Operations; Turn On The Power; Select The Source To Play - JVC RX-D211S Instructions Manual

Basic operations

1
Source lamps
1
4
7
10
1

Turn on the power

Press STANDBY/ON (or
remote control).
The standby lamp goes off and the source lamp of the current
source lights in red.
Current source name appears.
ANALOG
AUTO SURR
L R
S.WFR
To turn off the power (into standby)
Press STANDBY/ON (or
again.
The standby lamp lights in red.
NOTE
A small amount of power is consumed in standby mode. To turn
the power off completely, unplug the AC power cord.
12
2 2 3
1
2
3
2 3
5
6
8 9
0 10
AUDIO on the
TUNED STEREO AUTO MUTING
MHz
AUDIO on the remote control)
2

Select the source to play

On the front panel:
Turn SOURCE SELECTOR until the source name
you want appears on the display.
The source lamp corresponding to the selected source lights in
red.
• As you turn SOURCE SELECTOR, the source changes as
follows:
ANALOG
AUTO SURR
L R
S.WFR
DVR/DVD VCR
1
USB
TV (SIRIUS* )
FM AM
(Back to the beginning)
DVR/DVD* 2 : Select this for the DVD recorder or DVD player.
VCR* 2 : Select this for the VCR.
DBS* 2 : Select this for the DBS tuner.
TV* 1,2 : Select this for the TV.
SIRIUS* 1 : Select this for the SIRIUS Satellite Radio.
USB: Select this for the PC component.
XM: Select this for the XM Satellite Radio.
FM: Select this for an FM broadcast.
AM: Select this for an AM broadcast.
From the remote control:
Press one of the source selecting buttons.
• For "FM" and "AM," press FM/AM. Each time you press FM/AM,
the mode alternates between "FM" and "AM."
* 1 Changing the source name of TV/SIRIUS input
On the front panel only:
Press SET when "TV" is selected as the source.
• "ASSIGN SIRIUS" appears on the display for a while.
ANALOG
AUTO SURR
L R
S.WFR
• When you change the source name to "TV," press SET when
"SIRIUS" is selected as the source. "ASSIGN TV" appears on
the display for a while.
NOTE
When you change the source name to "SIRIUS," you cannot
select "TV" as the source.
* 2 Selecting the analog or digital input mode
You need to select the proper input mode according to the
connection method (analog or digital) on pages 7 to 10.
• In case of digital connection, you also need to select the correct
digital input terminal. (See "Setting the digital input (DIGITAL IN)
terminals—DIGITAL IN 1/2/3" on page 25.)
• "DIGITAL AUTO" and "ANALOG" setting are memorized for each
source.
TUNED STEREO AUTO MUTING
MHz
DBS
XM