Table of Contents
Advertisement
b. Recirculating (Non vented, Ductless)
If your oven is to be vented into the kitchen, the standard charcoal filter is already installed in your oven, ready
for recirculating mode.
When you replace the charcoal filter, refer to the instructions in the Operating Instructions (Maintenance/Care
and Cleaning of Your Microwave Oven).
Changing the exhaust direction to the recirculating mode
blower unit
mounting screws
blower unit
1. Remove two blower cover plate mounting screws and two blower unit mounting screws, top and rear.
(Fig. D-b-1)
2. Remove the blower cover plate from the product. (Fig. D-b-1)
3. Carefully lift the blower unit out of the product, and rotate blower unit 90 degrees so the exhaust ports are
facing toward the front of the product. (Fig. D-b-2)
blower unit
mounting screws
blower unit
4. Replace blower unit back into product. Be careful not to pinch the lead wires between blower unit and oven
top. Make sure the fan blades are visible through the front exhaust openings. (Fig. D-b-3)
5. Replace blower cover plate onto the product. Secure blower unit with two screws, one through blower plate the
other through oven back plate. Secure blower cover plate onto the product top with two screws. (Fig. D-b-4)
6. Slide two tabs of ventilation exhaust covers into two small square openings of blower cover plate so that two
large openings are covered. Secure each with one screw. (Fig. D-b-5)
Make sure two tabs are inserted into square holes and the screw heads are not protruding from blower cover
plate surface.
Two ventilation exhaust covers (Hardware Item7) and the screws (Item8) are shown on page No.2 B
INSTALLATION HARDWARE, and can be found in your product package.
blower plate
mounting screws
blower plate
back plate
blower unit
mounting screws
Fig. D-b-1
blower plate
mounting screws
blower plate
back plate
blower unit mounting screws
Fig. D-b-4
Flat surface of blower unit
(No exhaust shown on top)
Fig. D-b-3
blower unit
Fig. D-b-2
Fig. D-b-5
Page 3
Advertisement
Table of Contents
