Removing And Installing The Front Bezel - Lenovo ThinkCentre 7258 User Manual

Removing and installing the front bezel

This section provides instructions on how to remove and install the front bezel.
To remove and install the front bezel:
1. Remove the computer cover. See "Removing the computer cover" on page 85.
2. Release the three plastic tabs on the left side of the front bezel and pivot the
3. To reinstall the bezel, align the plastic tabs on the right side of the bezel with
4. To complete the installation, go to "Completing the FRU replacement" on page
bezel outward. Carefully set the bezel to the side without disconnecting the
power switch and LED assembly cable.
the corresponding holes in the chassis, then pivot the bezel inward until it
snaps into position on the left side.
120.
Chapter 8. Replacing FRUs - Tamdhu Computers
87