Table of Contents
Advertisement
Motherboard Manual
Header for Memory Voltage Overclocking: JDDRII_2.3V
When processing Memory Voltage Overclocking, please place the jumper to
pin1-2 Closed. The Default setting is Pin 2-3 Closed.
Note:
1.
When "JDDRII_2.3V" jumper cap is placed on Pin 2-3, memory voltage
can be manually adjusted under CMOS setup.
2.
When "JDDRII_2.3V" jumper cap is placed on Pin 1-2, memory voltage
will be fixed at 2.3V automatically, and can't be adjusted under COMS
setup.
Before setting memory voltage overclocking, please ensure that your DDR
supports up to 2.3V. (Consulting your DDR supplier)
On-Board LED Indicators
There are 2 LED indicators on the motherboard to show system status.
LED_D1 and LED_D2:
These 2 LED indicate system power on diagnostics.
Please refer to the table below for different messages:
LED_D1
LED_D2
ON
ON
ON
OFF
OFF
ON
OFF
OFF
18
1
Pin 1-2 Close:
Memory voltage 2.3V.
3
1
1
Pin 2-3 Close:
Normal status (default).
LED_D1
LED_D2
Message
Normal
Memory Error
VGA Error
Abnormal: CPU / Chipset error.
3
3
Advertisement
Table of Contents
