Formatting A Disc; Dvd-Rw - Toshiba DVR620KU Owner's Manual

Choosing the Recording Format of a Brand-New DVD-RW
When inserting a brand-new DVD-RW or DVD+RW, the unit automatically starts to initialize the disc. DVD+RW will
always be formatted in +VR mode, and DVD-RW will be formatted either video or VR mode according to the recording
format mode setting of the unit. Before insert a brand-new DVD-RW, you need to set the recording format to the
desired mode. You can also manually format a DVD-RW once it has been used.
Note
• The recording format setting is effective only for
DVD-RW. You cannot change the recording format
for a DVD-R and DVD+RW/+R.
• You cannot mix two formats on one DVD-RW disc. If
you insert a disc that has been formatted before, the
recording format is not changed if you select another
format in the "Setup" menu only. To reformat a disc
(change disc format type), refer to "Reformatting a
Disc Manually" on page 29.
28 28
E9PKAUD_DVR620KU_EN.indd 28 E9PKAUD_DVR620KU_EN.indd 28
Downloaded from www.Manualslib.com

FORMATTING A DISC

OPEN/ INPUT
CLOSE SELECT HDMI
.@/: ABC DEF
TRACKING
GHI JKL MNO
PQRS TUV WXYZ SAT.LINK
TIMER
SPACE
PROG.
SETUP SETUP DISPLAY AUDIO
DISC MENU TOP MENU
ENTER ENTER
CLEAR RETURN
INSTANT 1.3x/0.8x
TIME SLIP
SKIP PLAY
REV PLAY FWD
SKIP STOP SKIP
PAUSE
VCR DVD
DUBBING REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
SE-R0295
EN EN
manuals search engine
1
Press [SETUP].
2
Use [K / L] to select "DVD Menu",
then press [ENTER].
Setup
General Setting
Timer Programming
Title List
DVD Menu
3
Use [K / L] to select "Format", then
press [ENTER].
DVD Menu
Format
Finalize
4
Use [K / L] to select "Format Mode",
then press [ENTER].
DVD Menu
Format
Finalize Start
Format Mode
5
Use [K / L] to select "Video mode" or
"VR mode", then press [ENTER].
6
Press [SETUP] to exit.
7
Insert a brand-new disc.
Formatting will start.
Formatting
8
Formatting is completed.
"100%" is indicated.
90%
3/25/2009 3:47:38 PM 3/25/2009 3:47:38 PM