Front Panel; Rear Panel - M-Audio Oxygen 49 Quick Start Manual

Features

Front Panel

1
2
8
9
10 10
1. LED Screen: The Oxygen 49 features a 3-digit LED display providing visual information regarding current
operation, programing and controller status.
3
Function Buttons: The Oxygen 49 features function buttons for programming, access to settings and
2.
advanced features.
Sliders: These send different types of standard MIDI CC messages or advanced MIDI messages based on the
3.
parameter they are assigned to or the active preset.
4. Control Knobs: These knobs send different types of standard MIDI CC messages or advanced MIDI
messages based on the parameter they are assigned to or the active preset.
5. Pads: Press these velocity-sensitive pads to send Note On/Off and velocity data when performing. To change
the pad octave assignment, hold down the Shift and the + or - octave button. These changes affect all eight
pads globally. To transpose from the default pad assignments, hold down the Shift and Select button and press
the + or - octave buttons. To reset the pads to the default factory assignments, hold down the Shift and both
octave buttons.
Transport Buttons: Sends standard MIDI CC, MIDI note, MMC (MIDI Machine Control) or other advanced
6.
MIDI messages based on the parameter they are assigned to or the active preset.
7. Velocity-Sensitive Keyboard: The velocity-sensitive keyboard is not only the primary method of sending Note
On/Off and velocity data when performing, it is also used to access extended programing functions listed along
its upper edge.
Octave Buttons: The Octave buttons are used to shift the keyboard's octave range up or down in one octave
8.
increments, extending the octave range of the pads or keys. To learn more about additional features, please
see the full User Guide available at m-audio.com/oxygen49.
Pitch Bend Wheel: The assignable pitch bend wheel is primarily used to bend the notes played on the
9.
keyboard up or down.You can assign other functions to the Pitch Bend wheel in Edit Mode. To learn more
about this, please see the full User Guide, available at m-audio.com/oxygen49.
Modulation Wheel: This wheel is used to add expression to performances by changing the intensity of certain
10.
effects. Rolling the Modulation Wheel upward will increase the modulation effect, while rolling downward will
reduce the effect. You can assign other functions to the Modulation Wheel in Edit Mode. To learn more about
this, please see the full User Guide, available at m-audio.com/oxygen49.

Rear Panel

1. USB Port: The USB 2.0 port (backward-compatible with USB
1.1) delivers power to the keyboard and transmits MIDI data
when connected to a computer.
2. Sustain Pedal Input: This input accepts a momentary-contact
foot pedal (not included). When pressed, this pedal will sustain
the sound you are playing without having to keep your fingers
pressing down on the keys.
3. On/Off Switch: Use this switch to power the device on or off. When this switch is set to the "on" position,
Oxygen 49 is powered through the USB connection to your computer.
4. Kensington Lock Connector: This connector is compatible with standard laptop-style Kensington security
cables for theft protection.
3
7
7
4
4
6
4
1 2 3
6
1 2 3
5
4
5
4