7.11. Remove the SC-Board
1. Remove the SU-Board and SD-Board. (See section 7.9.
and 7.10.)
2. Disconnect the connector (SC2).
3. Disconnect the flexible cable (SC20).
4. Remove the screws (×8
7.12. Remove the SS-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (SS11, SS12 and SS33) and
the bridge connectors (SS21-SS02 and SS22-SS03).
3. Remove a short-jumper connector SS34 and re-use for
new SS-Board.
4. Disconnect the flexible cables (SS54 and SS56).
5. Remove the screws (×6
) and remove the SC-Board.
) and remove the SS-Board.
7.13. Remove the SS2-Board
1. Disconnect the bridge connector (SS21-SS02) and dis-
connect the flexible cable (SS52).
2. Remove the screws (×2
7.14. Remove the SS3-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (SS35).
3. Disconnect the flexible cable (SS57) and disconnect the
bridge cable (SS22 - SS03).
4. Remove the screws (×4
21
) and remove the SS2-Board.
) and remove the SS3-Board.