Panasonic TH-58PZ850U Service Manual page 24

7.22. Remove the stand brackets
and rear mounting metals
1. Remove the plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered)
with the plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screw
(×1 each).
3. Remove the rear mounting metals (left, right) fastening
screws (×4 each).
4. Remove the stand brackets and rear mounting metals.
5. Remove the fastening screws (×4
6. Remove the stand brackets from rear mounting metals.
7.23. Remove the Plasma panel sec-
1. Remove the stand brackets (left, right) fastening screw
2. Remove the cabinet assy and the plasma panel fastening
3. For leaving the plasma panel from the front frame, pull the
each).
24
tion from the Cabinet assy
(glass)
(×1 each).
, ×12
screws (×6 ).
bottom of the cabinet assy forward, lift, and remove.