Step 6 Desolder 7 pins at (ZJ600B) on Panel P.C.B..
Step 7 Remove the Panel P.C.B..
Caution: During assembling, ensure that Panel P.C.B. is
seated properly through the guides & fully catched.
8.7.
Disassembly of Remote Sensor
P.C.B.
• Refer to "Disassembly of Top Cabinet".
• Refer to "Disassembly of Front Panel Unit".
• Refer to (Step 1) to (Step 5) of item 9.6..
Step 1 Remove Remote Sensor P.C.B..
Caution: During assembling, ensure that Remote Sensor
P.C.B. is properly inserted & fully connected to Panel
P.C.B..
35