Table of Contents
Advertisement
Programming the Playing Order of the Tracks
—–Program Play
You can arrange the order in which the tracks play before you
start playing. You can program up to 32 tracks.
• To use Repeat play (see page 19) for Program play, press
REPEAT after starting Program play.
• This function does not work for MP3 discs.
On the unit ONLY:
1
Load CDs.
• If the current playing source is not the CD player, press
CD 6, then 7 before going to the next step.
2
Press PROGRAM so that
"PROGRAM" appears on the
display.
The PRGM (program) indicator also lights up on the
display.
• All Disc play is selected automatically. You cannot
select One Disc play for Program play.
TRACK
• If a program has been stored in memory, the program is
called up.
3
Press one of the disc
number buttons (CD1, CD2,
and CD3) to select the disc
number you want to play.
Disc number
Program step number
TRACK
Track number
4
Turn the 4/¢ control to select
the track number, then press SET.
Each time you select a track and press SET,
the selected track number is added to the
track number indicator.
• You can select up to the 99th track on each
disc.
TRACK
5
Program other tracks you want.
• To program tracks from the same disc, repeat step 4 .
• To program tracks from a different disc, repeat steps 3
6
Press CD 6.
The tracks are played in the order you
have programmed.
To stop during play, press 7.
To exit from Program play, press PROGRAM again before
or after play so that the unit enters All Disc play. (The
program you have made is stored in memory until you turn
off the unit, eject the carrousel, or erase the program.)
• Program play is also canceled when you press 0.
PROGRAM
To modify the program
Before playing, you can erase the last
programmed track shown on the display by
pressing CANCEL/DEMO.
• Each time you press the button, the last programmed track
is erased from the program.
P R G M
To check the program during play, perform the following
procedure:
• You can check only the programmed tracks on the current
ALL
DISC
disc at one time.
1 Press CD 6 to pause Program play.
2 Turn the 4/¢ control.
The programmed tracks on the currently selected disc
1
2
3
CD
CD
CD
appear on the display in the programmed (or reverse) order.
• If tracks on another disc have been programmed,
"PAUSE" appears on the display.
To check the programmed tracks on another disc, press
CD 6 twice, then turn the 4/¢ control.
• Pressing CD 6 again starts Program play from the track
currently shown on the display.
P R G M
To add tracks in the program before play, simply select the
disc numbers and/or track numbers you want to add by
following steps 3 and 4 of the programming procedure.
ALL
DISC
To erase the entire program before or during play, press 7
twice.
• Turning the power off or ejecting the carrousel will also
erase the stored memory.
"FULL" will appear on the display.
SET
Such program steps will be skipped.
P R G M
Even if you add tracks on the MP3 disc to the program in step 3 to 5 ,
ALL
DISC
those tracks will be skipped.
and 4 .
If you try to program a 33rd track
If you have programmed a track from an empty tray,
or a track number that does not exist on the disc
If there is an MP3 disc on the disc tray
Continued
CANCEL
/ DEMO
18
Advertisement
Table of Contents
