Table of Contents
Advertisement
2. Usage – Description continued.
1. Device Slot – A PDA slides into the slot for charging, data transfer or ActiveSync
connection.
2. LED Charging Indicator – Charging status of an spare battery is displayed. Refer to No.
4. Note that the LED on the PDA will show the charging status of PDA.
3. POGO Pin Connector – Used for data communication with PDA such as ActiveSync.
1
2
3
USB D-
USB D+
USB VBUS
4. USB Port* – USB host or client can be used. Make sure the switch is switched to proper side for use.
*USB host is not available in A-1CR-U0ED-110-R00 (Ethernet model).
5. Spare Battery Charging Slot – Spare battery can be charged in this slot.
6. USB Host/Client Toggle Switch* – When it is switched to H (left side) USB host function is available and when switched to C (right side) the
PDA can be connected to a host PC as a client.
*On A-1CR-US02-110-R00(Serial) and A-1CR-U0ED-110-R00(Ethernet), the switch must be switched to H or E (left side) to use serial
communication or Ethernet connection.
7. Power Connector* – AC power supply connector. Make sure the authentic power supply is used. *On A-1CR-U00D-040-R00(DC Jack) and A-
1CR-U0ED-110-R00(Ethernet), DC Jack type connector is used rather than 24 pin connector.
Caution
When switching between USB host (Serial, Ethernet) and client, the PDA must be removed from the
device slot.
4
5
COM6_DET (N/A)
RXD (N/A)
TXD (N/A)
6
7
8
9
USB ID
GND
5V
Charging LED description
LED Color
Meaning
RED
The spare battery is being charged.
GREEN
The spare battery is fully charged.
10
Advertisement
Table of Contents
