Fujitsu B22W-7 Operating Manual page 26

Operation
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the
ECO
The message ECO Mode on or ECO mode off appears.
If the ECO operating mode is activated, the following OSD settings are changed:
Colour
Brightness
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Selecting the input signal (D-SUB/DVI-D/DisplayPort)
► Press the INPUT
► Press the /
connection (VGA, DVI or DisplayPort).
► Press the MENU
This setting window can also be called up when the OSD menu is locked.
Performing auto-adjustment of the monitor
This setting is only possible with an analog VGA input.
► Press the
AUTO
The Auto Processing message appears.
Picture quality and position are set to optimum values for your system.
22
button to switch the ECO operating mode on or off.
6,500 K
reduced
button to call up the Input select setting window.
button or the
/ button to confirm or the
button for about 1 second.
/ button to select the desired monitor
AUTO / button to cancel.
Fujitsu