Specifi Cations - Sony KDL-52S4100 Service Manual

Power Requirements 120V - 240V AC, 50/60Hz
VIDEO (IN) 1/2:
S Video (4-Pin Mini DIN) (Video 1 only)
Video
Audio
COMPONENT IN 1/2:
YP
Audio
KDL-52S4100
SPECIFICATIONS
Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75 ohms
1 Vp-p, 75 ohms unbalanced, sync negative
500 mVrms (100% modulation)
Impedance:47 kilohms
P (Component Video)
B R
Y:1.0 Vp-p, 75 ohms unbalanced, sync negative
P :0.7 Vp-p, 75 ohms
B
P :0.7 Vp-p, 75 ohms
R
Signal format: 480i, 480p, 720p, 1080i, 1080p
500 mVrms (100% modulation)
Impedance: 47 kilohms
HDMI IN 1/2/3:
HDMI
Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p
Audio: Two channel linear PCM 32, 44.1, and 48 kz,
16, 20 and 24 bits
Audio (HDMI IN 1 only):
500 mVrms (100% modulation)
Impedance: 47 kilohms
AUDIO OUT:
500 mVrms (100% modulation)
More than 500 mVrms (Fixed)
DIGITAL AUDIO OUT (OPTICAL):
Optical Digital Audio Output (PCM/Dolby Digital)
PC IN:
Analog RGB (D-sub 15-pin):
0.7 Vp-p, 75 ohms, positive
Audio (Stereo mini jack):
500 mVrms
Impedance: 47 kilohms
Design and specifi cations are subject to change without notice.
KDL-52S4100
4