Section 2: Service Adjustments; Resetting To Factory Defaults After Board Replacement - Sony KDL-52S4100 Service Manual

2-1. RESETTING TO FACTORY DEFAULTS AFTER BOARD REPLACEMENT

Traditional Service Mode is not available in this chassis. The only option for service technicians is to reset all of the settings to the Factory Default from
the Self Diagnostic screen.
CAUTION: Resetting the TV to the Factory Defaults will over-write all customer settings including Parental Lock setting. Before performing this reset,
contact the customer to determine what adjustments they have made.
1. Turn on the TV.
2. While holding down the button on the remote control, press the POWER button on the TV.
The Initial Setup screen displays.
3. Select the language for the TV, then press the
4. To start Auto Program, press the
NOTE: Allow 30+ minutes for Auto Program to complete.
5. Using the customers information, reset their adjustments.
KDL-52S4100

SECTION 2: SERVICE ADJUSTMENTS

button on the remote control.
button on the remote control to select OK.
Select
button
RM-YD025
On-Screen
cursor button
KDL-52S4100
20