Table of Contents
Advertisement
Warning :
Never use the 800 ft magazine
without both platters.
67
3.6 800 ft magazine
Though the 800 ft design and loading is very close to the 400 ft ma-
gazine, the following points need to be respected.
3.6.1Feed side, loading.
The loading is very similar to the 400 ft. Do not forget to install the
upper platter when the film stock is loaded. This platter allows the
proper driving of the film, reduces the noise level and avoids scratch
problems.This platter and the take-up side platter must always be
clean.
3.6.2 Take-up side, loading.
The film path is the same as the 400 ft magazine. The 800 ft film
stock is delivered with a 3 inch core. It is necessary to use this kind
of core to ensure a proper take-up. If you need these cores you can
ask your Kodak dealer. The 2 inch core can be used but Aaton ad-
vises against it. The loop has to be adjusted to 14-15 perfs. Do not
forget to install the take-up side platter.
Advertisement
Table of Contents
