Overload Indicator - Pioneer VSX-808RDS Service Manual

Display
1
SIGNAL
SELECT
ANALOG
DIGITAL
AC-3
DTS
MPEG
1 SIGNAL SELECT indicators
Light to indicate the type of input signal selected for the
current component (refer to "Front Panel", %, SIGNAL
SELECT).
ANALOG : Lights when the analog audio signals are selected.
DIGITAL : Lights when the digital audio signals are selected.
AC-3 : Lights when a source with Dolby Digital signals is played.
DTS : Lights when a source with DTS audio signals is played.
MPEG : Blinks when the MPEG mode is selected, and lights
when a source with MPEG audio signals is played.
2 Digital indicators
dts : Lights when DTS signals are input. (Dolby/DTS/
MPEG mode is ON)
MPEG : Lights when MPEG signals are input. (Dolby/
DTS/MPEG mode is ON)
PRO LOGIC : When the Dolby mode on the receiver is
on, this indicator lights during 2 channel playback of
Dolby Digital sources.
DIGITAL : When the Dolby mode on the receiver is on,
this indicator lights to indicate playback of a Dolby Digital
signal. However, PRO LOGIC lights during 2 channel
playback of Dolby Digital.
3 SFC (DSP) mode indicator
Lights when the DSP mode or ADVANCED THEATER
mode (except for 5-D THEATER) is selected.
4 ATT indicator
Lights when ATT (refer to "Remote Control", 7, Number
buttons) is used to reduce the level of the input signal
(available in ANALOG mode only).

5 Overload indicator

When "ANALOG" is selected in SIGNAL SELECT, this
indicator lights to show that an excessively strong signal
is being processed. When this occurs, press ATT on the
remote control to attenuate the signal. Also, when
"DIGITAL" is selected in SIGNAL SELECT, this indicator
lights to show that a source containing an excessive
amount of information is being processed. When this
occurs.
6 5-D THEATER indicator
Lights when 5-D THEATER is selected.
7 MIDNIGHT indicator
Lights when the MIDNIGHT mode is on.
8 DNR indicator
Lights when the DIGITAL NR is on.
9 LOUDNESS indicator
Lights when loudness is on (refer to "Front Panel", -,
LOUDNESS).
2 3 4 5 6 7
SFC 5-D THEATER
MPEG
ATT MIDNIGHT
PRO LOGIC
DIGITAL
L C R
LS S RS
LFE
# $
8 9 0 - = ~
H.P
TAPE2
DIRECT
MONO
DNR LOUDNESS STEREO TUNED
RDS RF ATT
% ^
0 DIRECT indicator
Lights when direct playback is on (refer to "Front Panel",
@, DIRECT).
- TAPE 2 indicator
Lights when TAPE 2 MONITOR is on.
= Tuner indicators
STEREO : Lights when an FM stereo broadcast is
received in the auto stereo mode.
TUNED : Lights when a broadcast is received.
MONO : Lights when the tuner is set to receive FM
broadcasts in monaural.
~ H.P indicator
Lights when headphones are plugged in.
! Speaker indicators
Light to indicate the current speaker system (refer to
"Front Panel", 0, SPEAKERS (A/B)).
SP 3 A : Lights when speaker system A is selected.
SP 3 B : Lights when speaker system B is selected.
@ EON and EON reception indicators
EON indicator lights when the EON mode is on. EON
reception indicator
transmitting the EON data service is being received.
# Program format indicators
The following indicators light to show the channels being
played back.
1 2
L : Left front* * , C : Center*
LS : Left surround* 1 , S : Surround (mono)*
1
RS : Right surround*
*1: Indicates 5.1ch Dolby Digital playback.
*2: Indicates Dolby surround playback.
$ LFE indicator
LFE (Low Frequency Effects) indicator lights to indicate
that the program source contains an LFE channel. The
indicator to the left of LFE lights during actual playback of
the LFE signals (LFE signals are not present in all parts
of the sound track).
% Character display
^ RDS indicator
Lights when RDS broadcast is received.
& Volume level display
Displays the volume level. Volume level is maintained
even when the power is off. ---dB indicates the minimum
level, and 0dB indicates the maximum level.
• Depending on the level settings for individual
channels, the MAX level can range between –10dB
and 0dB.
* RF ATT indicator
VSX-808RDS
! @
SP AB
EON
dB
& *
lights when an RDS station
1 1 2
, R : Right front* * ,
2 ,
59