Kawai CN25 Owner's Manual page 47

3. Mounting the main body a
Ensure that two or more people undertake the
following step of the assembly process.
Lift the main body a and carefully place it onto the stand.
Position the main body towards the front of the stand, so that
the metal fitting holes are visible when viewed from above.
Gently slide the main body backwards until the base engages
with the fixings inside the side panels and locks into place.
When lifting the main body onto the stand, be
careful not to catch/trap hands and fingers.
1
a
b
a
b
Secure the main body to the stand from below, using the four
screws (with the flat washer and spring washer) g.
2
c
Tighten all screws securely to ensure that the
main body is firmly attached to the stand.
Failing to do so may result in serious injury.
a
b
a
b
d
a
g
g
b
Front view
b
b
47