Technical Data - Black & Decker Orb-it ORB48 Instructions Manual

You can check the location of your nearest authorised
repair agent by contacting your local Black & Decker office
at the address indicated in this manual. Alternatively, a list
of authorised Black & Decker repair agents and full details
of our after-sales service and contacts are available on the
Internet at: www.2helpU.com
Battery (Fig. E)
Z
If you want to dispose of the product
yourself, the battery must be removed as
described below and disposed of in accord-
ance with local regulations.
Discharge the battery by operating the appliance until
u
the motor stops.
Using a screwdriver, carefully remove the decorative
u
facia (13) by inserting it into the recess (14) and lifting.
Remove the four screws (15) holding the body of the
u
appliance together.
Lift the housing cover away from the assembly.
u
Lift out the battery pack / motor assembly.
u
Detach all lead connections from the battery pack /
u
motor assembly.
Remove battery pack / motor assembly.
u
Place the battery pack in a suitable package to ensure
u
that the terminals can not be short-circuited.
Take the battery to your service agent or to a local
u
recycling station.
Once removed, the battery can not be refitted.
(Original instructions)

Technical data

Voltage
V
dc
Type
Battery
Weight
kg
Charger
Input voltage
V
ac
Output voltage V
ac
Current mA
Approximate
h
charge time
Weight kg
ENGLISH
ORB48 (H1)
4.8
NiMH
0.75
BA090020D
VA090020D
230
9
200
16
0.22
9