Table of Contents
Advertisement
Janome 12000 Sewing Machine Instruction Manual
q
r
t
u y
www.janomeflyer.com
Cloth guide
Always leave sufficient space to the left of the machine
when using the cloth guide.
Do not use the cloth guide when the buttonhole foot R
is attached.
e
The extension table cannot be opened when the cloth
guide is in use.
w
Attaching the cloth guide
Insert the pin on the cloth guide into the carriage hole.
Turn the attaching knob clockwise to secure the cloth
guide.
Setting the cloth guide position
Press the adjust key to open the manual setting window.
Press the cloth guide key.
The visual touch screen will show a warning message.
Press the OK key.
The cloth guide adjustment window will open.
Press the
guide to the desired position.
The cloth guide will move the distance indicated on the
key.
The cloth guide position is indicated on the scale bar and
the distance from the center needle drop position is
indicated in millimeters or inches.
Press the OK key to register the setting and close the
cloth guide adjustment window.
NOTE:
The machine will not run if the cloth guide adjustment
window is open.
Press the default key to return the cloth guide to the
default position (15 mm or 5/8").
Make sure to return the carriage to the stored position by
pressing the cloth guide storage key and remove the
cloth guide after you finish sewing.
Overcasting with the Cloth Guide
Select pattern U13 and use the overedge foot M.
Set the cloth guide position at 5.0 mm (7/32") and sew.
36
CAUTION:
q Pin
w Cloth Guide
e Carriage Hole
r Attaching knob
t Cloth guide key
or
y Default key
u Cloth guide storage key
12000 Owners Manual/ User Guide
key to move the cloth
Advertisement
Table of Contents
