Sony DSC-P51M Service Manual page 82

10. Auto White Balance 3200K Check 1
Mode CAMERA
Subject Clear chart
(Standard picture frame with the
zoom lens at WIDE end)
Measurement Point Displayed data
of Page: 1
(Note 2)
Specified Value R ratio: 3F60 to 40A0
B ratio: 3F60 to 40A0
R-Y level data: 007E to 0082
B-Y level data: 007E to 0082
Note 1: Perform this check after performing after performimng
"Auto White Balance 3200K Standard Data Input".
Note 2: Check that the data of page: 6, address: 02 is "00".
If not, turn the power of unit OFF/ON.
Note 3: The right four digits of the page: 1 displayed data of the
adjusting remote commander.
1:XX:XX
Checking method:
Order Page Address Data
1
2 6 37 0D
3 6 01 11
4 6 38
5 6 01 C1
6 6 02
7 0 03 04
8 1
9 0 03 05
10 1
11 0 03 2C
12 1
13 0 03 2D
14 1
Processing after Completing Adjustment:
Order Page Address Data
1 6 01 00
2 6 B6 00
3
RadarW RadarW RadarW RadarW RadarW
Video terminal of
VIDEO OUT jack
(75 Ω terminated)
Displayed data
Procedure
"Auto white Balance 3200K
Standard Data Input" is
completed.
Press PAUSE button.
Check the data changes to
"01".
Press PAUSE button.
Check the data changes to
"01".
Check that the displayed data
(Note 3) satisfied the R ratio
specified value.
Check that the displayed data
(Note 3) satisfied the B ratio
specified value.
Check that the R-Y level data
(Note 2) satisfied the
specified value.
Check that the B-Y level data
(Note 2) satisfied the
specified value.
Procedure
Press PAUSE button.
Perform "Auto white Balance
3200K Check 2".
5-21
DSC-P51/P51M