Panasonic SA-AK340P Service Manual page 19

Error Code Diagnosis Contents Description of error
ITOP UD assembly
IUDS UD assembly
HOME Cam gear/gear
assembly abnormal
LOAD Tray drive assembly
abnormal
PDRV Cam gear/gear
assembly abnormal
UDU UD base asssembly
abnormal
UDD UD base asssembly
abnormal
UD1 UD base asssembly
abnormal
F1NG Fail - safe mode. (For
open/close tray
unit(s))
UD Rack does not move to
front direction. This lead to
UD base not raise to top
position.
After TOP SW is detected,
UD rack does not move into
tray 1 position.
Cam gear does not move to
"HOME" position under
following conditions
1. After tray is load to
"PLAY" position.
2. After tray is unload to
"STOCK" position.
Tray unit does not move
from "STOCK" to "PLAY"
position
Cam gear does not move
from "HOME" to "PLAY"
drive position.
UD Base assembly does
not move upwards from tray
5 to tray 2
UD Base assembly does
not move downwards from
tray 1 to tray 5.
UD Base assembly does
not move to tray 1.
When the tray open
operation is performed, it
fails to open. It will
automatically close all trays
after the time-out by the
microprocessor. During this
time when it fails, the error
code will appear.
Automatic FL Display
19
SA-AK340P / SA-AK340PC
Remarks
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.