Advertisement
TROUBLE
After installation and
restarting, Windows 95/98
reports that the display
settings are still incorrect.
The above problem or other
troubles appear when using
non-Intel main board.
Unable to set high
resolution (over 640 x 480)
or color depth over 256-bit.
Fail to set high refresh rate.
DirectX or other
applications report no
video memory available.
Games or applications
report "No 3D acceleration
hardware found."
The PC will freeze when
operating some 3D games.
My MPEG player displays
bad quality video clips.
24
E. TROUBLESHOOTING
-
Make sure the "Assign IRQ to VGA" option is enabled
in the BIOS.
-
Check if there is enough IRQ for VGA.
-
Uninstall the driver, restart, and reinstall the driver.
-
Install display pack program corresponding to main
board (chipset) such as VIA-AGP4X, etc.
-
Make sure the driver installation is correct, or please
reinstall the driver in Control Panel/Monitor/Setup.
-
Install compatible driver for monitor.
-
It depends on the features of monitor. Consult your
monitor documentation for the proper configuration.
-
OS is not OSR 2.1 or later.
-
DirectX version is not 9.0 or later.
-
3D works only in 16-bit or 32-bit color depth. Switch
your color depth display mode to the corresponding
color depth.
-
Check necessary libraries such as DirectX or OpenGL.
-
Try to switch to a lower resolution.
-
Due to the update of driver, it might not be compatible
with some games, please download the right driver.
-
You must install DirectX 9 or later so that you can take
advantage of the hardware acceleration mode
(DirectDraw).
-
Try to switch to a lower resolution, color depth, or
refresh rate. And ensure hardware acceleration support.
GeForce 6 Series User's Manual
RECOMMENDED ACTIONS
Advertisement
