Connecting A Portable Digital Audio Player; Connecting A Subwoofer - JVC EX-A3 Instructions Manual

Preparation (continued)
Connecting a portable digital
audio player
Listening to analog sound from a
portable digital audio player
Main unit (front view)
Input
Stereo mini
plug cable
(not supplied)
To an audio output terminal (such as a
headphone terminal)
Portable digital audio player or
other audio device
Output
Outputting analog sound to a
portable digital audio player
Main unit (front view)
Output
To an audio input terminal
Portable digital audio player or
other audio device
Input
The audio output signal from the [LINE1 OUT] or
[LINE 2 OUT] terminal is processed to resemble
surround sound when the K2 function, clear voice
function, 3D PHONIC function, or headphone sur-
round mode function is activated. To record raw,
unprocessed sound, turn off these functions. Do not
turn the K2 function on or off while recording sound,
as this may cause intermittent sound output.
• An audio signal from a device connected to the
[LINE1 IN] terminal is not output via the [LINE1
OUT] terminal.
11
Do not turn on the power until you complete the connection.

Connecting a subwoofer

When you connect this system with an amplifier-
built-in subwoofer (not supplied), you can enjoy a
more dynamic bass sound. Refer to the manual of
the subwoofer for details.
Amplifier-built-in subwoofer
(not supplied)
Producing sound from the subwoofer
Press [S.WFR OUT] to select
"S WOOFER ON" (Subwoofer on) in
the display window.
• Each time you press [S.WFR OUT], the display
toggles between "S WOOFER ON" and
"S WOOFER OFF" (Subwoofer off).
NOTE
• When "S WOOFER ON" is selected, the bass
sound from the left and right speakers is auto-
matically turned down, and the bass sound is
emitted mainly from the subwoofer.
Stereo mini
plug cable
(not supplied)
Audio cable (not supplied)
(You can use the audio cable supplied
with the amplifier-built-in subwoofer.)
Main unit
(rear view)