Record Setup; General Setup; Detail Setup - Samsung SRV-940 User Manual

Chapter 5. Configuration

5.5 RECORD SETUP

This is a set up menu related to the DVR system. Press the MENU button and select the Tab using
the Left/Right button. The submenu related to the system then appears as illustrated below. Press
the ENTER button and select the submenu using the Left/Right button. Then press the ENTER button
again and you can select setup items using the Left/Right button.

5.5.1 GENERAL SETUP

1. IMAGE SIZE
Recording Resolution can be selected.
The higher the resolution the system is set to, the better the recording, but the more space the system
needs.
The Monitoring screen can be recorded on the system's HDD.
2. REPEAT RECORD: Set whether to repeat recording.
- [YES]: If no storage space is left on the HDD, recording is continued by overwriting the oldest data.
- [NO]: If no storage space is left on the HDD, recording is stopped.
3. WARNING MESSAGE
When the remaining capacity of the HDD reaches a predefined percentage, a warning message is dis-
played to users. The warning level can be set from 1 to 10%, 5 ~10% in general.
4. HDD WARNING BEEP
When the remaining capacity of the HDD reaches the predefined percentage, a warning beep is acti-
vated.
Digital Video Recorder 46 User's Manual
Chapter 5. Configuration

5.5.2 DETAIL SETUP

. CHANNEL : Select the channel for which to set DETAILED SETUP.
MODE : Select one of four recording methods below.
CONTINUOUS Continuous recording mode for 24 hours a day
SCHEDULE Reserved recording
Recording is activated when the system detects motion from input video
MOTION DETECT
images.
SENSOR Recording is activated when the system detects sensor operation.
DISABLE
This is the setup mode to disable recording
• V-LOSS : V-LOSS can be recorded when 'DETAIL SETUP/MODE' is set as MOTION DETECTION or SEN-
SOR and 'DETAIL SETUP/PRE EVENT DURATION' is set as 'ON'. In case of recording 'V-LOSS',
the data is recorded on a Log file.V-LOSS data can be searched for from the SEARCH menu
according the time when the V-LOSS occurred as recorded in the Log file. (Please refer to
4.5.6. Log file search)
· SCHEDULE : Press the ENTER button when the cursor is on SCHEDULE, and the schedule setup screen
appears as illustrated below.
Digital Video Recorder 47 User's Manual